ENGINEERING JOBS
JOB TITLE -  Please click on the Job Title to review the full job description.	MINIMUM EDUCATION / KEY WORDS	LOCATION	COMPENSATION
WE ARE CURRENTLY  UPDATING OUR JOB LISTS AND WILL HAVE ALL NEW JOBS POSTED SOON.  IF YOU ARE LOOKING FOR A JOB IN THIS INDUSTRY, PLEASE CLICK HERE TO SEND A WORD DOC RESUME TO BE CONSIDERED FOR OPENINGS WE HAVE AVAILABLE BUT NOT YET POSTED.
After you have sent your resume, please feel free to call 860-889-4141 between the hours of 9am-9pm EST to discuss any openings for which you might be a fit (Please do not call before sending your resume as we will not be able to tell which jobs would be a fit for you)
Automation/Controls Engineer	2+ to 5 years experience Minimum Education - Associate's Degree Willingness to Travel - Occasionally Skills and Certifications [note: required] Competent in Allen Bradley PLC Programming (Control Logix, SLC, PLC 5) Ability to read and create Electrical Schematics PLC Programming Knowledge of Motion Control, Induction and DC Motor Control Knowledge of Pneumatic Actuator Control and Relay Logic Working Knowledge of Mechanical Systems as they Apply to Automation AutoCAD Skills Preferred (Electrical Schematics) Knowledge of Motion Control, Induction and DC Motor Control	Ohio	up to 78k base
Cyber Systems Engineer	Qualifications: Bachelors of Science (or the equivalent) in Engineering, plus 10 years of related Systems Engineer/Cyber Security experience job experience with advanced penetration testing, system exploitation, and cyber security engineering including creating systems and applications security test plans and performing hands-on security testing leveraging adversarial tactics job experience performing network security analysis as well as working with network management tools job experience with risk management methodologies as well as analyzing test results and suggesting mitigation plans for security problems job experience with system configuration, development, and design specifically around enterprise systems, network architectures and hypervisors Development, engineering, interfacing and integration of security test plans and performing hands-on security testing leveraging adversarial tactics Software components including firmware, operating systems, drivers, applications and other computing system software Hardware components including electrical equipment, digital processing hardware (ASIC, CPLD, FPGA), circuit boards, microprocessor systems, computer system architectures and interfaces Strong self-motivation and initiative Familiarity with airborne electronic warfare domain is preferred	New Jersey	up to 160k base
Diffusion Process Engineer	Minimum of BS degree in Engineering OTHER SKILLS REQUIREMENTS: Minimum 5 years’ of hands-on semiconductor processing or related manufacturing experience. Familiarity with operation of BTI horizontal furnaces and Apex control systems, Applied Materials RPCVD, FSI Mercury Spray Acid tools, transfer tools and related metrology. Experience in Diffusion/Oxidation, Anneal, CVD and PECVD plasma processing and high vacuum systems. Hands-on experience with semiconductor processes	Greater KC Area	Call for Details
Digital Engineer (ASIC, CPLD, FPGA)	•BS or MS in Electrical Engineering or related field along with 1-2 years digital engineering experience. •1+ years hardware debugging which includes use of Signal Generator, Logic Analyzer, Digital Oscilloscope, JTAG and Imbedded FPGA Debugging tools; •Ability to obtain a security clearance.	California	up to 78k base
Electrical Engineer	5+ to 7 years experience Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally Skills and Certifications [note: bold skills and certification are required] Is candidate a U.S. Citizen or Permanent Resident (TN visa not accepted)? recent experience, within the past year, with PCBs currently a 'hands on' electrical engineer Ideal Candidate Must have recent PCB experience.	Rhode Island	up to 110k base
Electrical Project Manager	10+ to 15 years experience Management Experience Required - Yes Minimum Education - Professional Degree Willingness to Travel - Occasionally Skills and Certifications [required] Previous experience as an Electrical PM, min value $5M+	Texas	up to 110k base
Electrical Project Superintendent	Qualifications: Active Journeyman’s License required Prior knowledge and/or ability to learn and understand the estimating process Must be a Safety True Believer Proficiency with MS Excel and Word is required Exposure to Accubid a plus Strong verbal, written, analytical, organizational, and interpersonal skills Strong customer service skills required Ability to be mobile to various locations and available to travel to project areas as project needs are required Willingness to travel Bachelor’s degree in Construction Management, Engineering or related field is preferred or previous work as Licensed Electrician/Supervisor 10+ years of electrical construction experience including 5+ years leading large jobs in Industrial/Commercial industry	Texas	up to 100k base
Embedded Software Engineer	2+ to 5 years experience Minimum Education - Bachelor's Degree experience with UML embedded development with C++ experience with real time operating systems, VxWorks specifically	New Jersey	up to 115k base
Engineer II / Electrical	Candidate or incumbent must have engineering and management knowledge and skills as follows: Able to organize and prioritize assignments as a participant to assigned functional teams (minimum 2 years working in a team environment). Demonstrates excellent written and verbal communication skills across all levels. Ability to represent functional and operations organization with clarity Supports and drives change management within function Functional or cross functional liaison with stakeholders concerning operational or project deliverables. Ability to manage customer satisfaction initiatives. General knowledge and understanding of the Food and Drug Administration (FDA) 21 CFR 820 and International Organization for Standardization (ISO); minimum 1 year working in a regulated environment.	Maryland	up to 85k base
Field Service Technician	2+ to 5 years experience Minimum Education - High School Diploma or Equivalent Willingness to Travel - Always Skills and Certifications [required] switchgear substation medium and high voltage electrical distribution Ideal Candidate must have experience working with switch gear this is a field service role so they will be traveling to customer sites on a day to day basis	Oklahoma	up to 70k base
Injection Profile Owner	EDUCATIONAL AND OTHER SKILL REQUIREMENTS: This position requires a BS in Mechanical, Electrical or, its equivalent in experience in plastic injection molding. This position requires mechanical and technical skills. High school diploma or equivalent and technical background with the ability to develop skills in SPC techniques. Ability to make decisions through analysis of data, and computer utilization. Five to seven years’ experience from on-the-job training programs, and operation experience is considered best entry into this position. Ability to develop skills in SPC techniques. The incumbent shall make decisions making through analyzing of data and computer utilization. Applicable skills are acquired by taking courses in mechanical and technical subjects. High degree of understanding regarding the closure manufacturing process, and the use of tools, and devices used to repair and maintain equipment and facilities.	Indiana	up to 85k base
Manager, Electrical Engineering, R&D	Qualifications BS in Electrical/Electronic engineering or equivalent with a minimum of 10 years of experience is required in an environment developing new products; MSEE is desirable Medical Device Experience is required Must be able to lead teams and have departmental management experience. Must be skilled in troubleshooting, and construction of prototype and test equipment; Must be able to train, mentor and work well with others; Must have excellent skills in verbal, written and graphical communication; Must have a good attitude, work ethic.	California	up to 140k base
Manager - Maintenance & Engineering	Qualifications: B.S. in Electrical or Mechanical Engineering 3+ years of experience in maintenance management within a small to medium sized manufacturing facility	Ohio	up to 100k base
Principal Engineer - Power Electronics	Master’s degree in Electrical Engineering, or equivalent experience. 12+ years of experience in electronic circuit design. Expertise in power electronics, magnetics, motor controls, machines and systems applications. Expertise in power converter architectures, design practices for gate drivers and other power circuits, understanding of physical design of power electronics for noise immunity. Expertise in analyzing and designing analog and digital dynamic controls for power conversion equipment and electric machines, understanding of modulation methods for inverters and converters.   Expertise in worst case analysis and system modeling (PSIM, MATLAB/Simulink, etc.). Expertise in the use of test and measurement equipment for electrical systems in high noise environments.  Skilled in electromagnetics and design practices for compliance with EMI standards, filter synthesis and design. Skilled in probability analysis, experiment design, wear out mechanisms, and failure modes. Understanding of industry standards (IEC, UL, ISO, SAE) as related to electrical systems design, functional safety, and components.	North Dakota	up to 140k base
Principal Estimating Manager	Qualifications: Education, Experience, Knowledge and Skills: (Minimum requirements) Understand mechanical, electrical, process piping / equipment and owners cost estimating & schedule requirements and coordinate input with the Project Team with timely and professional presentations. Ability to conceptually visualize and quantify project requirements. Knowledge of building construction, materials, systems, market conditions and trade practices; some general PM experience and scheduling knowledge would be an advantage. Excellent collaboration and communication skills are required. Bachelor’s degree in engineering, construction management, building construction or similar is preferable or applicable experience. Candidate should have a minimum of 12-15 years of estimating experience in the Construction Industry. It is an advantage to have experience in the Pharmaceutical/Biotech Industry. Strong computer skills and familiarity with Microsoft office suite programs. Knowledge of Estimating Programs; in particular Timberline is desirable. Certification by AACE is preferred. PMP certification is a plus. Some travel may be required	California	up to 160k base
Quality Engineer	Qualifications: Prefer that candidates have a Bachelor’s degree in  EE ; PQE Certification is desirable. Four-plus years of experience working as a Quality Engineer ISO 9001:2008 lead auditor certification desirable	Rhode Island	up to 105k base
Reliability Engineer	Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally Skills and Certifications [required] 5 yrs of current/direct, hands on experience in Reliability Engineering U.S Citizen or Permanent Resident? (We can not sponsor any Visa's) current experience with data analytics current experience with ERP systems? 5 yrs of current/direct, hands on experience in Reliability Engineering current experience with data analytics current experience with ERP systems current Regulatory compliance experience	Rhode Island	up to 115k base
RF Design Engineer	5+ to 7 years experience Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally Skills and Certifications [required] Bachelors degree in BSEE or MSEE at least 5 years of recent exp. with design/development of RF products? Is candidate a US citizen or Permanent resident (we cannot accept Visas to include TNs)?	Rhode Island	up to 120k base
Senior Engineer or Engineer - Electrical: Plant Technical	MINIMUM QUALIFICATIONS: Bachelor’s degree in Electrical or other appropriate engineering field Substantial experience in planning, design, specification preparation, maintenance, project cost estimating, and scheduling (typically achieved after 7 years’ practice as a degreed engineer for the senior level) Technical expertise in electrical power systems in an industrial environment  Experience leading engineering projects Strong interpersonal and communication skills Demonstrated organization, documentation, prioritization, and project management skills Ability to work effectively and collaborate with a wide range of internal and external customers Ability to drive up to 5 hours per day, walk at least 1 mile over uneven ground, and climb and descend stairs, ladders, and temporary scaffolds to access equipment	Washington State	up to 100k base
Sr. Quality Engineer, Instruments	Education: Bachelor’s degree with 5 years of experience in a regulated environment or MS with 3 years of experience. Typical degree in Electrical or Mechanical or Industrial Engineering.   BS in related field required with minimum of 3 years of Quality Operations or Regulatory experience in the medical device environment or 5 years in manufacturing environment or MS with 3 years of experience. Typical degree in Mechanical or Electrical or Industrial Engineering, Biological Sciences, Chemistry, and/or Computer Science or other related field. Experience and understanding of electro-mechanical instrumented systems. Professional certifications such as Certified Quality Auditor/Certified Quality Engineer, Six Sigma preferred.	Maryland	up to 105k base
Staff Electro-Mechanical Engineer	Education: B.S in Mechanical Engineering, Electrical Engineering, or equivalent.  Masters or PhD is preferred.   Experience: A minimum of 6 years’ experience with the development of novel electro-mechanical devices, preferentially encompassing all stages from early concept development until product launch.  Expertise in development of cross-functional systems, including integration with analog/digital signal processing, electrical/electronic systems, software and optical systems.    Experience in design for reliability and design for manufacturing Experience in modeling, simulations and sensitivity analyses.   Proficiency with one of the CAD design tools (SolidWorks, Pro/E, AutoCAD). Exposure to Human factors engineering (preferably in the medical space) including user studies and usability documentation Experience as member of a cross functional project team Expertise in common risk management techniques (FMEA, FTA, ETA). Proficiency with basic statistical techniques including familiarity with analysis of variance (ANOVA) and design of experiment (DOE) methodologies. Proficiency in generating customer requirements and writing product requirements, specifications, test protocols, and test reports.	New Jersey	up to 130k base
Staff Quality Engineer II	Qualifications Bachelor’s Degree in a technical discipline, preferably Electrical Engineering, Electronics, Biomedical Engineering or related discipline A minimum of 12 years relevant experience or a combination of equivalent education and relevant experience Knowledge of electrical systems, products, components, applications, component’s capabilities, electrical testing methods, testing finished products and system capabilities Demonstrate functional knowledge and expertise in product development, verifications, validations, reliability, human factors, regulatory requirements, international standards, and risk management Extensive knowledge of applicable regulatory (such as 21 CFR Part 820, ISO 13485, ISO 14971, IEC 60601 and IEC 62304) Corporate and / or Unit requirements Understanding of IEC-60601, IEC-62366 and IEC-60950 Prior experience with Medical electrical system with software Prior experience with reusable medical devices Prior experience with reliability engineering testing Class II / III medical device experience Knowledge of design control principles	New Jersey	up to 100k base